SFP Types

  • Short Wavelength (SWL)
  • Long Wavelength (LWL)
  • Extended Long Wavelength (ELWL)
  • Wave Division Multiplexing (WDM)

 

SWL Fiber Optic SFP Module – Based on short-wavelength 850 nm lasers supporting 2 and 4 Gbit/sec link speeds. This SFP module supports 50/62.5µ, multi-mode fiber optic cables, 50µ cable is recommended.

Note: Short-wavelength SPF modules may be labeled MM (for multi-mode), SW, or SWL (for short-wavelength laser).

LWL Fiber Optic SFP Module – Based on long-wavelength 1310nm lasers supporting 2 and 4 Gbit/sec link speeds. This SFP module supports 9µ single-mode fiber optic cables.

ELWL Fiber Optic SFP Module – Based on long-wavelength 1550nm lasers supporting 2 Gbit/sec link speeds. This SFP module supports 9µ single-mode fiber optic cables and distances over 50 km.

WDM Fiber Optic SFP Module – Based on various wavelength lasers ranging from 1470nm to 1610nm supporting 2 Gbit/sec link speeds. Requires external xWDM mux/demux module to transmit multiple wavelengths simultaneously over a single fiber optic cable. WDM devices support long-distance connectivity to 100 km and beyond.

TST_ST01_B20_1:admin> sfpshow
Area 0: id (sw) Vendor: FINISAR CORP. Serial No: U85066V

Area 1: id (sw) Vendor: FINISAR CORP. Serial No: H11XSF9

. . . [truncated]

 

TST_ST01_B20_1:admin> sfpshow 0

Identifier: 3 SFP

Connector: 7 LC

Transceiver: 150c402001000000 100,200,400_MB/s M5,M6 sw Inter_dist

Encoding: 1 8B10B

Baud Rate: 42 (units 100 megabaud)

Length 9u: 0 (units km)

Length 9u: 0 (units 100 meters)

Length 50u: 15 (units 10 meters)

Length 62.5u:7 (units 10 meters)

Length Cu: 0 (units 1 meter)

Vendor Name: FINISAR CORP.

Vendor OUI: 00:90:65

Vendor PN: FTRJ8524P2BNV

Vendor Rev: A

Wavelength: 850 (units nm)

Options: 0032 Loss_of_Sig,Tx_Disable

BR Max: 0

BR Min: 0

Serial No: U85066V

Date Code: 050729

Temperature: 28 Centigrade

Current: 6.678 mAmps

Voltage: 3319.4 mVolts

RX Power: 408.0 uWatts

TX Power: 311.9 uWatts

TST_ST01_B20_1:admin>

Passive/Active Copper SFP Module

The Copper (Cu) SFP module is based on the High-Speed Serial Data Connection HSSDC2 interface standards. The module provides a female HSSDC2 connector. Passive and Active Copper cables are currently being qualified.

All of the supported SFPs are of the intelligent variety, which means on-board information about the SFP transceiver can be viewed with the sfpShow command.

RAID

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *